PrintVision 30cm A3 Dual-Head DTF Printer with Powder Shaker

Compact A3 DTF Printing and Automatic Powder Curing

This 30 cm / A3 DTF production set combines a roll-fed DTF printer with an integrated powder shaker and dryer. The supplier offers dual Epson XP600 or I1600 printhead configurations, CMYK plus white ink, white-ink circulation and an automatic powdering workflow for small-batch garment transfer production.

Key Features

• 300 mm / A3 printing width for DTF PET film
• Dual-head configuration supporting Epson XP600 or I1600 printheads
• CMYK + White DTF textile pigment ink workflow
• White-ink circulation, stirring and alarm system designed to reduce settling and help protect the printheads
• Integrated powder shaker and dryer to automate powder application and curing
• Hoson control board and Gigabit Ethernet data interface
• Supplier-stated production speed up to approximately 4 m²/h; actual speed depends on print mode and configuration
• Suitable for custom apparel, caps, shoes, canvas bags and other compatible textiles

Technical Specifications

Applications

Create heat-transfer graphics for T-shirts, hoodies, hats, shoes, canvas bags and other compatible fabrics. DTF transfers can support multicolor artwork and short-run customization without direct garment loading.

Typical Workflow

1. Prepare the artwork and configure the RIP.
2. Print color and white layers onto DTF PET film.
3. Apply hot-melt powder in the shaker and remove excess powder.
4. Cure and dry the coated transfer film.
5. Heat-press the transfer onto the garment or textile item.
6. Peel according to the selected film instructions.

FAQ

Is the powder shaker included?

The selected source variant is listed as “A3 DTF XP600 + shaker.” Confirm the final package list and included accessories in the quotation.

Which printheads are supported?

The supplier lists dual Epson XP600 or I1600 configurations. Confirm the exact installed heads before ordering.

What electrical details should be confirmed?

Confirm voltage, phase, frequency, plug type and the combined printer/shaker circuit requirement for the destination country.